A13-olinuxino Rev.A

Este modelo tem formato de nano-ITX. O preço base sera entre 40 a 50 euros (sem WIFI e Flash NAND)

obs: Esta em fase de testes, possivelmente a venda a partir de setembro


  • Allwinner A13, Cortex A8 processor at 1GHz, 3D Mali400 GPU
  • 512 MB RAM
  • 6-16VDC input power supply, noise immune design
  • 3 + 1 USB Host, 3 available for users 1 for (optional) WIFI RTL8188CU 802.11n 150Mbit module on board
  • 1 USB OTG which can power the board
  • SD-card connector for booting the Linux image
  • (optional) 4GB NAND flash
  • VGA video output
  • LCD signals available on connector so you still can use LCD if you diasble VGA/HDMI
  • Audio Output
  • Audio Input
  • RTC PCF8536 on board for real time clock and alarms
  • 5 Keys on board for android navigation
  • UEXT connector for connecting addtional UEXT modules like Zigbee, Bluetooth, Relays, etc
  • GPIO connector with 68/74 pins and these signals : 17 for adding NAND flash; 22 for connecting LCDs; 20+4 including 8 GPIOs which can be input, output, interrupt sources; 3x I2C; 2x UARTs; SDIO2 for connectinf SDcards and modules; 5 system pins: +5V, +3.3V, GND, RESET, NMI
  • (Optional low cost 7″ LCD with touchscreen)

Mais sobre A13-OLinuXino

Mais sobre Allwinner A13